IMET Ktech 502F2000
Provided by the IMET website:
The K-Tech 502 F2000 , the natural development of the automatic version of the KS 502, has its movements guided by supports on heavy load balls type linear guideway, CNC control for clamps and arc rotation.
- Control of cutting angles by encoder and inverter, optimized selection of cuts via cnc for multiple operations with simple guided programming.
- It has an integrated keyboard with CNC control on 3 axes, large RAM memory, LCD display for guided setting of cut parts with the necessary angles, possibility of cutting with double angle on one side.
- The numerical control allows to set and save over 300 cutting programs with different shapes,quantities and lengths.
- Monoblock column and frame with conveyor in an electrically welded solid steel structure. High precision of positioning thanks to the linear hardened guides and to the recycling screw with a diameter of 32 mm, controlled by inverter.
- Steel saw frame with tubular cross section; table for material supported by a central preloaded bearing. Adjustable bearings with conical rollers on a swinging pin. Single-block longlife gearmotor.
- Blade tension 1700 Kg/cm2 with blade guide runners adjustable with hard metal inserts and guide bearings.
- Adjustment of the force and speed of saw frame descent with separate controls, to adapt the cutting parameters to the type of material.
- Total stroke 2050 mm, minimum scrap end 165 mm at 0°. Minimal lubrication system as standard.
- End of the cut with tilted blade - minimum 5° on 450 mm ensure better penetration, increased blade life and rapid action.
- Cuuting capacity : round till 310 mm., square till 280 mm. and rectangular till 450x270 mm.
For more detailed information, visit the IMET product page here: