Category: Band Saw

Provided by the IMET website:

High production twin column bandsaws, the X-TECH 410 is suitable for a variety of cutting requirements,combining advanced technology with an extremely solid mechanical structure.

• It has one system that allows the vices to ‘back off’ to avoid the blade rubbing on the cut surface during the ascent of the sawframe for the following cut.
• The added advantage of this design enables the use of high performance TCT bandsaw blades. Hydraulically pressure of ground TCT blade guides for maximum precision and squareness of cut.
• With the option “Short Batch & ‘One Off’ Sawing” there is the possibility to cut not completely the material section in automatic cycle.
• Automatic Trim Cut option, if the material has an accettable pre sawn face, it will be accurately & automatically located relative to the blade ‘zero’position. This feature saves time and cuts down on material wastage.
• All operating functions of the machine, errors and problem solving messages are clearly displayed.
• A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the sawframe descent speed in the event of blade deviation.
• Cutting capacity at 90 °: Round 410 mm., square 410 mm. Rectangular 420 x 410.

For more detailed information, visit the product page on IMET here:

http://www.imetsaws.com/site/en/product/3

Provided by the IMET website:

Automatic upright band sawing machines, suitable for section and full profile cutting of medium and large dimensions, equipped with numerical control to manage motorized arc rotation from 60 ° right to 60 ° left and programming feeder carriage lengths.

• The arc in electro-welded steel with a thick section guarantees the absolute lack of vibrations.
• The movement of the bow is perfectly balanced and guaranteed by the large diameter hydraulic cylinder.
• The numerical control allows to set and store over 90 cutting programs, with different quantities, lengths and angles.
• Programming keyboard integrated with CNC, positioned on mobile console, LCD display for visualization of work phases and self-diagnostics.
• The rotation of the arc takes place on large preloaded bearings by means of a geared motor and a self-braking motor with encoder for reading the position. Automatic locking of the arc rotation is hydraulic.
• Hydraulic vertical pressure to optimize the blocking of the material and avoid vibrations during cutting (Optional).
• Blade refrigeration with minimal standard lubrication, to make cuts on sections and pipes without the inconvenience of dispersion of the traditional liquid typical of cuts on relevant lengths.
• Hydraulic power unit with energy saving as standard, during cutting and in phases where no hydraulic pressure is needed, the control unit switches off, thus guaranteeing considerable energy savings.
• Cut to 90 °: round 520 mm., Square 450 mm., Rectangle 680 x 400

For more detailed information, visit the product page here:

http://www.imetsaws.com/site/en/product/65

Provided by the IMET website:

The K-Tech 502 F2000 , the natural development of the automatic version of the KS 502, has its movements guided by supports on heavy load balls type linear guideway, CNC control for clamps and arc rotation.

• Control of cutting angles by encoder and inverter, optimized selection of cuts via cnc for multiple operations with simple guided programming.
• It has an integrated keyboard with CNC control on 3 axes, large RAM memory, LCD display for guided setting of cut parts with the necessary angles, possibility of cutting with double angle on one side.
• The numerical control allows to set and save over 300 cutting programs with different shapes,quantities and lengths.
• Monoblock column and frame with conveyor in an electrically welded solid steel structure. High precision of positioning thanks to the linear hardened guides and to the recycling screw with a diameter of 32 mm, controlled by inverter.
• Steel saw frame with tubular cross section; table for material supported by a central preloaded bearing. Adjustable bearings with conical rollers on a swinging pin. Single-block longlife gearmotor.
• Blade tension 1700 Kg/cm2 with blade guide runners adjustable with hard metal inserts and guide bearings.
• Adjustment of the force and speed of saw frame descent with separate controls, to adapt the cutting parameters to the type of material.
• Total stroke 2050 mm, minimum scrap end 165 mm at 0°. Minimal lubrication system as standard.
• End of the cut with tilted blade – minimum 5° on 450 mm ensure better penetration, increased blade life and rapid action.
• Cuuting capacity : round till 310 mm., square till 280 mm. and rectangular till 450×270 mm.

For more detailed information, visit the IMET product page here:

http://www.imetsaws.com/site/en/product/62

Information provided by IMET website:

Semiautomatic hydraulic bandsaw specially designed for cutting medium and big size of pipes and profiles. Mitre cutting up to 60° left and right, with easy stops at 0°, 45° left and 45° right.

• Very strong steel sawframe with tubular section, pulleys diameter 520 mm.
• Hard metal pads inside the blade guides. Possibility to slide the frontal vice along the work table. Wide working space to support the material.
• Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start and end cut point.
• Mobile console with 3-ways selector to choose different working modalities: the return of the sawframe with steady blade, or end at the cutting cycle without the return of the sawframe.
• Cutting capacity: round till 500 mm., square till 420 mm. and rectangular till 600×350 mm.

For more detailed information, visit the product page on IMET here:

http://www.imetsaws.com/site/en/product/17

Information provided by IMET website:

High production twin column bandsaws, the X-TECH 410 is suitable for a variety of cutting requirements,combining advanced technology with an extremely solid mechanical structure.

• It has one system that allows the vices to ‘back off’ to avoid the blade rubbing on the cut surface during the ascent of the sawframe for the following cut.
• The added advantage of this design enables the use of high performance TCT bandsaw blades. Hydraulically pressure of ground TCT blade guides for maximum precision and squareness of cut.
• With the option “Short Batch & ‘One Off’ Sawing” there is the possibility to cut not completely the material section in automatic cycle.
• Automatic Trim Cut option, if the material has an accettable pre sawn face, it will be accurately & automatically located relative to the blade ‘zero’position. This feature saves time and cuts down on material wastage.
• All operating functions of the machine, errors and problem solving messages are clearly displayed.
• A device for checking the accuracy/ squareness of the cut, with automatic adjustment or stopping of the sawframe descent speed in the event of blade deviation.
• Cutting capacity at 90 °: Round 410 mm., square 410 mm. Rectangular 420 x 410.

For more detailed information, visit the IMET product page here:

http://www.imetsaws.com/site/en/product/3

Information provided by the IMET website:

Semi-automatic semi-vertical band saws with vertical uprights with the concentrate of the best technology for cutting special and large steels.

• Base and arc in electro-welded steel with thick sections that guarantee the absolute absence of vibrations.
• The material positioning rollers controlled by an oleodynamic engine are the distinctive elements of a new and performing project.
• The blade is tensioned by a hydraulic cylinder, the perfect tension is controlled by the sawing software.
• Hydraulic power unit with variable displacement pump that guarantees low noise and constant operating pressure, with pressure reducers for clamps.
• During the rotation of the blade motor a special tool compares the instantaneous effort with the effort that has been preselected with the possibility of stopping without causing damage if significant variations occur.
• Cut to 90 °: round 900 mm.e framework 900 mm.

For more detailed information, visit the product page on IMET here:

http://www.imetsaws.com/site/en/product/84

For more detailed information on these products, visit the product pages here on IMET:

BS 300 PLUS GH : http://www.imetsaws.com/site/en/product/26

BS 400/60 AFI-NC: http://www.imetsaws.com/site/en/product/38

BS 350 SHI: http://www.imetsaws.com/site/en/product/32