Posted on November 13, 2018 by Emily Vertolli - Cold Cut Saw
Provided by the IMET website:
Automatic CNC vertical column circular saw; mitre cutting from 0° to 45° right (only semiautomatic cycle) and from 0° to 60° left.
- Suited to cut high-resistance steel, the version with electronic Inverter widens the cutting possibilities, from stainless steel to brass and copper.
- Primary transmission with pulleys and cogged belt, final reduction in oil bath with big-size bronze crown gear.
- Vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping; anti-burr adjustable device, pneumatic vertical vice.
- Blade spindle with 40 mm diameter.
- Electro-pneumatic driven functioning,hydraulic control of the down-feed speed of the head.
- Feeder movements by electric motor with encoder,200 mm. opening, minimum stroke 4 mm.(minimum scrap-end 170 mm.), maximum stroke 520 mm.
- Up to 99 programs can be memorized, each one with different cutting lengths and number of cuts.
- Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180×100 mm.
For more detailed information, visit the product page on IMET here:
http://www.imetsaws.com/site/en/product/49
Posted on November 13, 2018 by Emily Vertolli - Cold Cut Saw
Information provided by the IMET website:
Automatic circular saw suited to cut aluminium,light metal solids and profiles with high accuracy. Possibility to set the machine for brass and copper profiles.
- Mitre cutting from 0° to 45° left and right.The head bends 45° on the vertical axis to allow inclined cuts.
- Easy stops at 0°, 15°, 30°, 45° left and right. Hand-wheel to lock the head on all angles, graduation engraved on the worktable.
- Electro-pneumatic functioning, hydraulic control of the down-feed speed of the head.
- Electronic driver with programming of all operations by means of the keyboard.
- Manual selection of the cutting length with digital reading and decimal nonius.
- Pair of front pneumatic vices with quick clamping, free to move alongside the worktable, vertical pneumatic vice.
- Feeder with 200 mm opening, maximum stroke 520 mm, minimum stroke 4 mm (minimum scrap-end 355 mm); selection of the number of cuts (1-9999) and the feeder strokes (1-29) by means of the keyboard.
- Cast iron head avoids vibrations. Additional vertical pneumatic vice guarantee a perfect material locking.
- Cutting capacity at 90 ° round till 120 mm., square till 105 mm. 200×80 mm.
For more detailed information, visit the product page on IMET here:
http://www.imetsaws.com/site/en/product/51
Posted on November 13, 2018 by Emily Vertolli - Band Saw, Cold Cut Saw
Information provided by the IMET website:
Hydraulic semiautomatic bandsaw, mitre cutting from 0° to 60° left and from 0° to 45° right.
- Hydraulic vice with adjustable guides, free to move alongside the worktable, with quick motion and clamping.
- Easy stops at 0°, 45°, 60° left and 45° right. Adjustment of the blade tension from the front side of the sawframe, checked by an end-stroke. Blade guides with hard metal pads, additional bearing for blade alignment.
- Steel sawframe with tubular section, pulleys 360 mm diameter.
- Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and detect automatically the start-cut point.
- Cutting Capacity: rounds till 255 mm., square till 240 mm. and rectangular till 300×180 mm.
For more detailed information, visit the IMET product page here:
http://www.imetsaws.com/site/en/product/32
Recent Comments